Non-sagging Polyurethane Waterproof Coating
Zoom in
prev
  • Non-sagging Polyurethane Waterproof Coating
  • Non-sagging Polyurethane Waterproof Coating
  • Non-sagging Polyurethane Waterproof Coating
next
sku: Comensflex 8268GNS
Description
χ
This item has added to inquiry basket

Please check your inquiry basket.

χ
This item was already in your inquiry basket

Please check your inquiry basket.

  • Description
  • Send Inquiry
Comensflex 8268GNS One Component Non-Sagging PU (polyurethane) Waterproof Coating

DESCRIPTION
Comensflex8268GNS is a one component, moisture curable polyurethane waterproof coating. It is an isocyanate polymer, which before operation, it is a type of amorphous liquid, and after operation, it reacts with moisture in the air and then create a flexible and seamless waterproof layer. It has high tensile strength, good weather resistance, oil resistance, abrasion resistance, acid and alkaline resistance, adaptation to structure pressure deformation, excellent waterproofing and adhesion performances. The coating has a wide range of applications for waterproofing for building and construction.

USAGE
For various kinds of underground waterproof projects, such as subway, tunnel, concrete base slab construction in basement, internal and external walls, retaining wall. For various kinds of building's waterproof projects, such as housetop, wash-room, basement, kitchen, swimming pool, flowerbed, sluice gate, expansion joint, contraction joint, wall pipe, aqueduct, etc.

Application
The polyurethane waterproof coating Comensflex 8268GNS is anti-sagging, which is suitable for vertical surface.

OPERATION COURSE FOLLOWS
1. Basic surface treatment: Remove the earth, floating dust, perished, oil and grout. The basic surface should be made level off, dry and clean, rate of water content≤ 9%

2. Primer application: For dry, solid and clean concrete and mortar surface, the coating could be applied without primer, or Comensflex8268GNS can be served as primer. When cured, move to the next step.

3. Local enhancement: Some parts of construction should be treated ahead with the purpose of local enhancement, such as expansion joint, snug spot and pipeline joint. After the enhancement service, the overall waterproof operation can be taken.

4. The first coating operation: Scrape a layer of coating uniformly with plastic or rubber scraping panel. The layer should not be too thick or too thin (thickness is around 0.8mm). At the beginning, the operation should be accorded with the size and shape of the surface area, and make an overall plan of applying sequence. Scrape for the second time after the first layer is cured. The scraping method is same as the first time, but the scraping direction of should be vertical with the first time. Scrape for the third time if needed after the second layer is cured.
Consumption: Thickness=1mm, consumption is 1.2kg/m2; Thickness=1.5mm, consumption=1.8kg/m2; Thickness=2mm, consumption is 2.4kg/m2.

5. Make a piece of protection or finish: When the coating operation is finished but not completely cured, clean sand (the sand diameter is no bigger than 2mm) can be scattered on the coating surface, in order to enhance the adhesion between the coating layer and the cement mortar that will be covered on the layer. When the coating is completely cured and it is checked qualified, the cement mortar protection layer or the finish layer can be done.

COLOR
Grey

PACKAGING
18kg/pail, 25kg/pail or according to customer's requirement

TECHNICAL DATA SHEET
S. No Item Data
1 Tensile strength (MPa) ≥2.0
2 Elongation at break (%) ≥500
3 Tear strength (N/mm) ≥12
4 Bending performance, -40c No cracks
5 Tack-free time (h) ≤6
6 Dry time (h) ≤12



Please choose if you agree to the privacy policy