Home>Construction & Flooring>PU Wood Floor Adhesive>PU (Polyurethane) Adhesive for Timber Floor Bonding
PU (Polyurethane) Adhesive for Timber Floor Bonding
< Prev | Next >
Zoom in
prev
  • PU (Polyurethane) Adhesive for Timber Floor Bonding
  • PU (Polyurethane) Adhesive for Timber Floor Bonding
next
sku: Surtek 3526
Description
χ
This item has added to inquiry basket

Please check your inquiry basket.

χ
This item was already in your inquiry basket

Please check your inquiry basket.

  • Description
  • Send Inquiry

Surtek 3526 PU (Polyurethane) Adhesive for Timber Floor Bonding


DESCRIPTION
Surtek 3526 is a one-part polyurethane adhesive for direct elastic bonding of timber floors. The adhesive is of low viscosity and cures on exposure to atmospheric moisture.

ADVANTAGES
1-component, ready to use
Solvent free
Fast curing properties
Floor can be sanded after 12 hours(full Surface bonding, +23° C/50%r. H., up to 1 Mm adhesive thickness) Excellent workability, very easy to extrude; Good initial tack; Odourless; Elastic, footfall sound-dampening; Suitable for most common types of wood floors
Especially suitable for problematic Woods including beech, maple and Bamboo
Suitable for bonding wood floors directly Onto old ceramic tiles
Reduces stress to the substrate: The elastic Adhesive reduces stress transfer between The wood floor and the substrate Suitable for use with sub floor heating

APPLICATION FIELDS
For Full Surface bonding:
Solid and engineered wood floors-(strips, Longstrips, planks, panels, boards), Mosaic parquet, industrial parquet, lam Parquet, wood paving(residential)as well As chip boards can all be fully bonded
For Beaded Application:
Solid wood boards, 3-ply engineered
Wood as well as chip boards can be Bonded

Elastic Bonding of skirting boards/ baseboardsAnd door thresholds etc.


Technical Data

Surtek 3526
1 Color Parquet brown
2 Chemical Base 1-part Polyurethane, moisture curing.
3 Density (DIN 53479) 1.32 kg/l
4 Skinning-/Laying Time 55 minutes
5 Curing Rate 2.5 mm/24h
6 Sag Flow Consistency: Spreads easily, trowel marks stable. Easily applied by guns.
7 Service Temperature -40°C to+80°C
8 Shear Strength 0.8 N/mm2
9 Tensile Strength 1.6 N/mm2
10 Shore A Hardness 40
11 Elongation at Break 550%
NOTE: at 23°C and 50% relative humidity



Please choose if you agree to the privacy policy

Browse Other Products